|
 Elecon
has developed several such gear boxes, SBF 355/350/ S/SO is displayed.
These are parallel shaft gear boxes with Pinion Stand,
either two - or -three high, used for cold rolling of metal sheets or
strips.
Teeth of pinion,Wheel and pinion, stand pinions are
made from high tensile carburising alloy steel, 17 CrNiMo6 as per DIN
17210 - Case hardened to 60 ± 2HRC and precisely ground to class
of accuracy 6 as per DIN 3961 - 63, high speed shafts dynamically balanced.
The shafts are supported on Anti-friction Special Roller Bearings of
adequate size to take care of radial and axial loads permitting large
degree of freedom against misalignment.
The gear box is installed with centralised Lub Oil
system for providing necessary amount of oil to various gear meshes
and bearings thereby resulting into smooth and trouble free operation.
Technical Specifications :
|