Facilities

We are using advanced continuous mixer and Alfa set binder for moulding of steel castings and gravity & centrifugal die process for non-ferrous castings. Our castings are testimonial to its superior infrastructure like Induction furnaces, Gas fired furnaces, Centrifugal casting machines, Continuous sand mixer, Heat treatment shop, well equipped laboratory with Tensile testing and Spectrometer. Our castings are tested for Ultrasonic, Radiographic, MPI & DP.  For machining we have various sizes of Conventional Turnings, Horizontal and Vertical Lathes. 

Steel Division

  • Well equipped pattern storing and repairing yard.
  • 3D Modeling software for theoretical weight calculation.
  • Types of pattern :
    • Thermocol
    • Wooden
    • Aluminium
  • Match plate mounted patterns.
  • Max. mould box size : 4500mm X 1100mm X 450mm and 2600mm dia  X 450mm.
  • 2nos of Continuous sand mixer using alfa set binders.
    • capacity : 20 MT/hr & 10 MT/hr
2nos of Induction furnace

  • Capacity : 3MT, 2.5MT and 1.5MT(Dual crucible).
  • Laddle capacity : 3MT, 4MT and 10MT with bottom pouring.
  • Casting Capacity : 5MT Single Piece.
  • 5 numbers of heat treatment furnaces for Conventional Heat treatment.
  • 4nos of Hanger type shot blasting m/cs
  • 3 numbers of gas carburising furnaces (capacity 760mm dia and 350kg & 1200mm dia and 3MT) for through as well as case hardening of Alloy steel castings.
  • Well equipped fettling shop with heavy duty swing frame grinders, Pneumatic chippers, Sanders and so on.
  • Spetrometer for chemical analysis
  • Metallurgical microscope
  • Vicker’s hardness testing machine
  • Digital as well as poldy hardness testers
  • Impact testing m/c and Universal tensile testing m/c.
  • NDT facilities like DP, MPI, UT & RT
  • Very well equipped machine shop with almost all types of machines.
  • Also we are supported by our Engg. Division with over 200 CNC / NC machines.

Non – Ferrous Division

  • Centrifugal die casting, gravity die casting and conventional sand moulding for non ferrous castings.
  • 3nos of induction furnaces of 300kg, 150kg and 100kg capacity
  • 2nos of gas fired furnaces of 300kg and 200kg capacity.
  • Single piece capacity : 150kg/pc for aluminium casting and 500kg/pc for copper base casting.
  • Very well equipped machine shop with almost all types of machines.
  • Also we are supported by our Engg. Division with over 200 CNC machines.