For a richer surfing experience on our website, please update your browser. Update my browser now!
Steel tubes having diameter 20 to 50 mm sizes are drawn by cold drawing process and process from steel stripes passes through each gear unit output double shafts on which different formation of shape dies are mounted on both output shaft and between dies, steel stripes passes results to form a steel tube of specific diameter. These type of Gear units are installed in series. The first gear box is having three input in which the first input is connected to electric motor. Second input is connected to the input of next gear box and the third input is connected to generator so that in case of the power failure the process of drawing the tube will continue in operation. The other gear units in the series is having input shaft double extended. These type of gears are specially developed for one.Documentation Product Enquiry Where to buy?
46 KW at 1500 rpm.
|1st gear box K190/80 FSH S/SO||9.75||46 KW at 1500 rpm|
|Gear boxes in series||9.75